Ata<cr – Rainbow Electronics GE863-GPS low power User Manual
Page 32
GE863-GPS Software User Guide
1vv0300724 Rev. 3 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved
page 32 of 122
To answer the call:
•
Send command
ATA<cr>
•
wait for response:
Response
Reason
Action
CONNECT 9600
The incoming call was a DATA
one and called modem is now
on line.
exchange data..
ERROR
No incoming call is found, call
may have been lost
call lost
NO CARRIER
The incoming call was a DATA
one and the modem
handshaking has not been
successful
check for mobile registration
and signal strength and modem
settings.
OK
The incoming call was a VOICE
call and is now active.
proceed ahead
TIP: The call is answered with the appropriate type (VOICE or DATA) regardless of the
+FCLASS setting active. To distinguish between Data and Voice see the command response or
the extended format incoming call indication.