Peerless-AV IWB600-UNIV - Installation - Manual (Page 10)

10 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
Installing to SMARTboards
Rest Smart Board face down on a non abrasive surface to prevent scratching.
Attach vertical supports to board using four 1/4 - 20 phillips head screws ( K) through plastic bushings (M), and
.320 ID x 1 x .375 spacers ( L) as shown in detail 1.
NOTE: Vertical supports can be adjusted vertically in 2" increments to change Smartboard position.
4
K
M
L
L
K
M
SMARTboard
SKIP TO PAGE 18
Hook top vertical supports ( A) onto exposed M5 x 8 mm phillips screws on top depth adjusting brackets (D).
Secure using two M5 x 8 mm phillips screws ( J) in extended position as show in detail 2.
5
SMARTboard
Exposed M5 x 8 mm
phillips screw
J
DETAIL 2
A
D
SKIP TO PAGE 18
DETAIL 1