Peerless-AV IWB600-UNIV - Installation - Manual (Page 4)

4 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
White board
NOTE: Adjust vertical supports to fit height of white board.
Mock up vertical support positions by positioning top and bottom vertical supports ( A and B) onto white board as
shown. Use two support brackets to determine positioning.
4
Using information from step 4, secure top vertical supports ( A) to bottom vertical supports (B) using four M5 x 8
mm phillips screws ( J). Repeat using second top and bottom vertical supports (A and B).
5
A
B
C
B
A
J
USE HOLES CLOSEST TO END OF
VERTICAL SUPPORTS