Peerless-AV IWB600-UNIV - Installation - Manual (Page 12)

12 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
Hook top vertical supports ( A) onto exposed M5 x 8 mm phillips screws on top depth adjusting brackets (D).
Secure using two M5 x 8 mm phillips screws ( J) in extended position as show in detail 4.
5
J
DETAIL 4
Exposed M5 x 8 mm
phillips screw
A
A
D
Fasten Hitachi bracket (supplied with Hitachi Starboard) to vertical support using two M6 x 12 mm phillips screws
( Q) and two M6 nylon nuts (P) as shown below.
Repeat using second vertical support ( B).
4
P
Installing to Hitachi Starboards
Q
(supplied with Hitachi Starboard)
Rest Hitachi Starboard face down on a non abrasive surface to prevent scratching.