Peerless-AV IWB600-UNIV - Installation - Manual (Page 6)

6 of 18 ISSUED: 11-09-10 SHEET #: 125-9158-4 12-21-10
White board
TOP
Secure bottom depth adjusting brackets ( F) to mounting surface using two screws provided by
installer, and 1/4 washers ( I) if required as shown in detail 2.
NOTE: Make sure mounting surface is suitable to hold the weight of the mount and smart board.
9
Screws provided by
installer
Fasten knob ( H) through outer hole in support bracket (C) to determine rubber bumper (E) placement.
Secure rubber bumper ( E) to board.
Repeat on opposite side of board.
8
C
E
H
C
E
H
BOTTOM
White board
I
BACK OF WHITE BOARD
DETAIL 2