Ironwood Electronics GHZ LGA Socket (-M) Assembly Instructions - Manual

Socket
Top Assembly
Compression Screw
Compression plate
BGA Package
Z-Axis Angle Elastomer
Note: Do not remove.
It is placed in a specific
orientation and attached
to the four corners using
special adhesive.
Socket Base Assembly
Machine Screw
Socket Lid
GH
Z
Socket
(-M)
Assembly Instructions
© 2000 IRONWOOD ELECTRONICS, INC.
Tele: (800) 404-0204
www.ironwoodelectronics.com
1. Place LGA package (land side down) into the socket. NOTE: LGA orientation on target PCB is critical.
2. Place the compession plate on top of the LGA package.
3. Install the socket top assembly with the hardware provided (four 0-80 screws).
4. Turn the compression screw clockwise, until it makes contact with the compression plate.
5. Turn an additional 1/8th to 1/4th of a turn.
page 1 of 1
Filename: GMI.mcd, Rev C, 6/26/01, IP