Factory Direct Hardware Hansgrohe 10402001 Axor Starck X - Manual (Page 4)

4
User Instructions
• Pivot the lever upward to turn the water on, down to turn it off. Pivot the handle left
to obtain warmer water, to the right to obtain cooler water.
• When the unit is turned on, the water will come from the tub filler. Pull the diverter
knob to obtain water from the handshower When the water is turned off, the
diverter will automatically reset to the tub filler position.
• The handshower uses the Rubit!™ self-cleaning system. The
spray channels are lined with a material that resists scale
buildup. If scale buildup is noticed in the spray channels, turn
the water on lightly and rub across the channels with a finger
or a sponge to dislodge them.
• The check valve located in the handshower outlet should be
removed and checked yearly.
Reset the High Temperature
Limit Stop (Optional)
• Use a 4 mm allen wrench to push the
gray rubber screw cover through the
hole in the handle. Loosen the handle
screw 4 complete turns. Pull the
handle off. Retrieve the screw cover.
• Remove the nut cover and the handle
screw.
• Center the cartridge stem.