SCANTECH ID (Champtek company) SIRIUS S-7030 - Manual (Page 7)

Preface
The Scantech Sirius S-7030 scanner combines the demand for table mounted-
and hand held scanning. The ergonomic design ensures effortless handling and
the sympathetic good looks will automatically enhance any working environment.
It is based on proven Scantech-ID technology which forms the basis of all our
omni-directional scanners. Bar code labels are read by presenting the labels
towards the scanner. Alternatively you can take the scanner in your hand and
present it towards the bar code. Using both functionality‟s results in maximum
scanning capabilities, using only a minimum footprint on the counter desk.
One button operates the Sleepmode (wake-up) and the „single-line‟ feature, such
you can easily target, similar to an ordinary, non-omni directional handgun. This
is convenient if you need to scan just one out of many labels close to each
other.
The Sirius S-7030 reads all popular bar code symbologies. For the reading of
damaged and out-of-spec codes, the latest ASIC technology and STAR code
reconstruction software has been integrated.
The Sirius S-7030 is equipped with triple interface for integration in nearly every
environment. The interface (RS-232, Key Board Wedge or USB) is selected by
the cable connected. USB plus power is supported as well. The low power
consumption makes the Sirius multi-connectable. The Sirius is available in three
different colour schemes and standard supplied with an EAS antenna and its
very flexible stand for turning 360 and tilting ± 25 degrees.
This manual contains three chapters and three appendices. The first chapter
describes the Sirius and its general features. The description for installation
can be found in the second chapter. Precisely follow the instructions for the
installation of the scanner. The scanners‟ settings can be changed with
the bar code labels from the Configuration Guide that came with the unit.
Chapter three describes the daily use of the scanner.
Appendix A gives the pin definition for the connected cable. The pin definition
may be required when you want to make a new or special cable for
communication with the POS/computer. Technical specifications of the Sirius
S-7030 can be found in Appendix B. Refer to Appendix C for troubleshooting
if the scanner is not working properly.