Af-60 lp™ micro drive operating instructions – GE Industrial Solutions AF-60 LP Micro Drive Operating Instructions User Manual

Page 21

Advertising
background image

The small digits to the left are the selected parameter number.

Illustration 4.3: Indicating selected par. no.

The large digits in the middle of the display show the value of the selected
parameter.

Illustration 4.4: Indicating value of selected par.

The right side of the display shows the unit of the selected parameter. This
can be either Hz, A, V, kW, HP, %, s or RPM.

Illustration 4.5: Indicating unit of selected par.

Motor direction is shown to the bottom left of the display - indicated by a
small arrow pointing either clockwise or counterclockwise.

Illustration 4.6: Indicating motor direction

Use the [MENU] key to select one of the following menus:

Status Menu:
The Status Menu is either in Readout Mode or Hand Mode. In Readout Mode the value of the currently selected readout parameter is shown in the display.

In Hand Mode the local Keypad reference is displayed.

Quick Menu:
Displays Quick Menu parameters and their settings. Parameters in the Quick Menu can be accessed and edited from here. Most applications can be run by setting
the parameters in the Quick Menus.

Main Menu:
Displays Main Menu parameters and their settings. All parameters can be accessed and edited here. A parameter overview is found later in this manual.

Indicator lights:

Green LED: The frequency converter is on.

Yellow LED: Indicates a warning. Please see section Troubleshooting

Flashing red LED: Indicates an alarm. Please see section Troubleshooting

AF-60 LP™ Micro Drive Operating Instructions

20

DET-579A

4

Advertising