Af-60 lp™ micro drive operating instructions, 2 quick menu parameters - pi basic settings qm2 – GE Industrial Solutions AF-60 LP Micro Drive Operating Instructions User Manual
Page 24
1-25 Motor Nominal Speed (n
m.n
)
Range:
Function:
M-type De-
pendent*
[100 - 9999 RPM]
Enter motor nominal speed from nameplate data.
1-29 Auto Tune
Option:
Function:
Use Auto Tune to optimize motor performance.
NB!
This parameter cannot be changed while motor runs.
1.
Stop the frequency converter – make sure motor is at standstill
2.
Choose [2] Enable Auto Tune
3.
Apply start signal
– Via Keypad: Press Hand
- Or in Remote On mode: Apply start signal on terminal 18
[0] *
Off
Auto Tune function is disabled.
[2]
Enable Auto Tune
Auto Tune function starts running.
NB!
To gain optimum tuning of frequency converter, run Auto Tune on a cold motor.
3-02 Minimum Reference
Range:
Function:
0.00*
[-4999 - 4999]
Enter value for minimum reference.
The sum of all internal and external references are clamped (limited) to the minimum reference value,
par. 3-02.
3-03 Maximum Reference
Range:
Function:
Maximum Reference is adjustable in the range Minimum Reference - 4999.
50.00*
[-4999 - 4999]
Enter value for Maximum Reference.
The sum of all internal and external references are clamped (limited) to the maximum reference value,
par. 3-03.
3-41 Accel Time 1
Range:
Function:
3.00 s*
[0.05 - 3600.00 s ]
Enter accel time from 0 Hz to rated motor frequency (f
M,N
) set in par. 1-23.
Choose a accel time ensuring that torque limit is not exceeded, see par. 4-16.
3-42 Decel Time 1
Range:
Function:
3.00*
[0.05 - 3600.00 s]
Enter decel time from rated motor frequency (f
M,N
) in par. 1-23 to 0 Hz.
Choose a decel time that does not cause over-voltage in due to regenerative operation of motor. Fur-
thermore, regenerative torque must not exceed limit set in par. 4-17.
4.4.2 Quick Menu Parameters - PI Basic Settings QM2
The following is a brief description of the parameters for the PI Basic Settings. For a more detailed description, please see AF-60 LP
™ Micro Drive Programming
Guide.
1-00 Configuration Mode
Range:
Function:
[]
Choose [3] Process Closed Loop
AF-60 LP™ Micro Drive Operating Instructions
DET-579A
23
4