Net Optics 10_100BaseT Teeny Tap User Manual
Operating: technical specifications, Power, Mechanical
Operating:
Technical Specifications:
Operating Temperature:
0ºC to 40ºC
Storage Temperature:
-10ºC to 70ºC
Relative Humidity:
10%min, 95%max, non-condensing
Power:
Input:
100-240VAC, 0.5A, 50-60Hz
Output:
5V 1.2A
USB Power:
5V 100mA
Mechanical:
Dimensions:
.875” high x 1.48” deep x 3.125” wide
Connectors:
Monitoring Ports:
(2) RJ45 8-pin Connectors
Network Ports:
(2) RJ45 8-pin Connectors
Cable Type:
22-24 AWG unshielded twisted pair, CAT5/CAT5e
Link Distance Supported: 100 meters
Certifications:
Fully RoHS compliant
Fully IEEE 802.3 compliant
Part Number
Description
TP-CUTT-USB
Copper Teeny Tap
All products include a 1 year manufacturer’s warranty. An additional
1 or 2 year extended warranty may also be purchased.
Net Optics Teeny Taps supply network visibility and monitoring access for network
managers on the go. Measuring only 3.125 by 1.5 inches, the compact Teeny Tap is the
best portable Tap in the world for network spot checks and bench testing. The Teeny
Tap ensures zero impact on network traffic while maintaining uninterrupted access for
monitoring and security devices. Enclosed in lightweight anodized aluminum, this Tap
is an invaluable tool for daily use in demanding network environments, and can be
powered from a USB port or standard AC outlet.
Zero Delay Technology
TM
– Net Optics’ engineering breakthrough ensures that any loss
of power to the Tap is transparent to the network, and does not affect the flow of
traffic through the Tap – eliminating packet delay and loss as potential security issues.
Full-duplex monitoring is a snap when each side of the signal is sent to a separate NIC
on the monitoring device. All network and monitoring cables necessary for plug-and
-
play deployment are included with a convenient Teeny Tap carrying case.
Without an IP address, monitoring devices are isolated from the network, dramatically
reducing their exposure to attacks. However, the monitoring device connected to the
Tap still sees 100% of full-duplex traffic as if it were in-line, including Layer 1 and
Layer 2 errors.
Passive, Secure Technology
• Provides passive access at 10 or 100 Mbps without data stream interference
or introducing a point of failure
• Unique Zero Delay technology ensures every packet goes through without
delay, even if power is lost to the Tap
• Compatible with Power over Ethernet (PoE) applications
• Passes all full-duplex traffic (including errors) from all layers for comprehensive
troubleshooting
• No IP address is needed for the Tap or monitoring device, enhancing
monitoring security
• Dual power ensures monitoring uptime
Ease of Use
• LED indicators show redundant power status
• All network and monitoring cables included with a convenient carrying case
• Etched application diagram illustrates all connections for easy deployment
• Tested and compatible with all major manufacturers’ monitoring devices,
including protocol analyzers, probes, and intrusion detection/prevention
systems
Net Optics® and Zero Delay Technology
TM
are registered trademarks of Net Optics, Inc. Copyright 1996-2010 Net
Optics, Inc. All rights reserved. Additional company and product names may be trademarks or registered
trademarks of the individual companies and are respectfully acknowledged. PUBTPCUTTD Rev. 1, 06/06
10/100BaseT
Teeny Tap
5303 Betsy Ross Drive • Santa Clara, CA 95054
Tel: +1 (408) 737-7777 • www.netoptics.com