Asus TS700-E7/RS8 - Manual (Page 109)

TS700-E7/RS8 5-39
Chapter 5
5.5.1 System Event Log
SEL Components [Disabled]
Allows you to enable/disable all features of system Event Logging during bootup.
Configuration options: [Disabled] [Enabled]
• The following items appears only when you set SEL Components to
[Enabled].
• All the changes will take effect after restarting the system after restarting All the changes will take effect after restarting the system after restarting
the system.
Erase SEL [No]
Allows you to choose the action in erasing SEL.
Configuration options: [No] [�es, On next reset] [�es, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose the action when SEL is full.
Configuration options: [Do Nothing] [Erase Immediately]
Change this to enable
or disable all features
of system Event Logging
during boot.
Enabling/Disabling Options
SEL Components [Disabled]
Erasing Settings
Erase SEL
[No]
When SEL is Full [Do Nothing]
Note: All values changed here do not take effect until
computer is restarted.
→←
: Select Screen
↑↓
: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Server Mgt
Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.