Asus TS700-E7/RS8 - Manual (Page 36)

2-16 Chapter 2: Hardware setup
Chapter 2
4. When the HDD module cage is
completely inserted, the cage latch
will be pushed back clockwise.
4
5. Lock the cage latch properly.
6. Connect the appropriate cables to
the SATA/SAS backplane on the
HDD module cage.
5
2.6.2 Removing the HDD module cage
1. Disconnect all the cables from the SATA/SAS backplane on the HDD module
cage.
2. Level the HDD module cage latch
counterclockwise. The HDD module
cage will be pushed out of the
chassis.
2