Asus TS700-E7/RS8 - Manual (Page 55)

TS700-E7/RS8 3-3
Chapter 3
5. Find the rear 1U space that
corresponds to the front 1U space
where you attached the rail.
6. Drive in two screws on the outer
holes to secure the rear end.
7. From the rack front, find the corresponding 1U space for the second rail pair.
8. Repeat steps 3–6 to attach the second rail pair.
3. Align the front end holes of a rack
rail pair to the 1U space.
4. Drive in two screws on the outer
holes to secure the front end.
3.4 Mounting the server to the rack
To mount the server to the rack:
1. Align the server rails with the rack rails.
2. Push the server all the way into the rack.