Asus TS700-E7/RS8 - Manual (Page 51)

TS700-E7/RS8 2-31
1
2
2
1
Ensure that no cables or
components are obstructing the
fan duct.
Installation
1. Orient the fan duct as shown, aligning
the three (3) screw holes with the
designated screw holes on the
motherboard.
2. Secure the fan duct with three screws.
Removal
1. Remove the three (3) screws
that secure the fan duct to the
motherboard.
2. Carefully pull-out the fan duct out of
the chassis.
Chapter 2
2.9.4 Fan Duct
This server system comes with a motherboard fan duct to enable better air flow
inside the motherboard while the system is running.
To install the fan duct on the motherboard, refer to the illustration below.