Asus ESC500 G2 - Manual (Page 122)

6-4 Chapter 6: Driver installation
6.1.4 Using a USB floppy disk drive
Due to OS limitation, Windows ® XP may not recognize the USB floppy disk drive
when you install the RAID driver from a floppy disk during the OS installation.
To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product
ID (PID) to the floppy disk containing the RAID driver. Refer to the steps below:
1. Using another computer, plug the USB floppy disk drive, and insert the floppy
disk containing the RAID driver.
2. Right-click My Computer on
the Windows ® desktop or start
menu, and then select Manage
from the pop-up window.
3. Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy,
and then select Properties from
the pop-up window.
The name of the USB floppy
disk drive varies with different
vendors.
or
4. Click Details tab. The Vendor ID
(VID) and Product ID (PID) are
displayed.
5. Browse the contents of the
RAID driver disk to locate the file
txtsetup.oem.
6. Double-click the file. A window
appears, allowing you to select the
program for opening the oem file.