Asus ESC500 G2 - Manual (Page 128)

6-10 Chapter 6: Driver installation
Loads the default
threshold values
for each sensor
Applies your
changes
Loads your saved
configuration
Saves your
configuration
6.3.2 Probe II
Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. Probe II senses fan rotations,
CPU temperature, and system voltages, among others. With this utility, you are
assured that your computer is always at a healthy operating condition.
Launching Probe II
To launch Probe II, click Tool > Probe II on the AI Suite II main menu bar.
Configuring Probe II
Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to
adjust the sensor threshold values. The Preference tab allows you to customize
the time interval of sensor alerts, or change the temperature unit.
• Click Monitor > Sensor on the AI Suite II main menu bar and the system on the AI Suite II main menu bar and the system and the system
status will appear on the right panel.
• Refer to the software manual in the support DVD or visit the ASUS website Refer to the software manual in the support DVD or visit the ASUS website
at
www.asus.com for detailed software configuration.