Asus ESC500 G2 - Manual (Page 91)

ASUS ESC500 G2 4-23
4.5.6 USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems
(OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
[Enabled] Enables the support for USB 3.0 devices on legacy operating
systems (OS).
[Disabled] Disables the function.
Intel xHCI Mode [Smart Auto]
[Smart Auto] Enables optimized xHCI.
[Auto]
Allows the system to set the xHCI.
[Enabled] Enables the operation of xHCI controller.
[Disabled] Disables the function.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI
hand-off feature.
[Disabled] Disables the function.