Asus ESC500 G2 User Manual
Page 53
Advertising
![background image](/manuals/301511/53/background.png)
3-11
ASUS ESC500 G2
• If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed
may not work.
• If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will
not work and the fan you installed will always run at full speed.
2.
Chassis Fan control setting (3-pin CHAFAN_SEL)
These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL
jumper is for the front fans and rear fans control. Set to pins 1–2 when using
3-pin fans or pins 2–3 when using 4-pin fans.
Advertising