Asus ESC500 G2 - Manual (Page 79)

ASUS ESC500 G2 4-11
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU
internal frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[X.M.P.] If you install memory modules supporting the eXtreme Memory
Profile (X.M.P.) Technology, choose this item to set the profiles
supported by your memory modules for optimizing the system
performance.
The item X.M.P. appears only when you set the Ai Overclocking Tuner to
[Manual].
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary
with the BCLK/PEG Frequency item settings.
Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz]
[DDR3-1400MHz] [DDR3-1600MHz]
Selecting a very high memory frequency may cause the system to become
unstable! If this happens, revert to the default setting.
iGPU Max. Frequency [Auto]
Use the <+> and <-> keys to adjust the value. The minimum frequency vary
depending on the type of CPU installed.
Configuration options: [Auto] [depending on CPU] [3000MHz]*
*only for desktop processors
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance.
Configuration options: [Ok] [Cancel]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use
the <+> and <-> keys to adjust the value. To restore the default setting, type [auto]
using the keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If
this happens, revert to the default settings. happens, revert to the default settings.