Diodes ZXBM5210 User Manual
New prod uc t zxbm5210, Description, Features
ZXBM5210
Document number: DS36765 Rev. 1 - 2
1 of 17
December 2013
© Diodes Incorporated
NEW PROD
UC
T
ZXBM5210
REVERSIBLE DC MOTOR DRIVE WITH SPEED CONTROL
Description
The ZXBM5210 is a single chip solution for driving a single-coil
reversible direct current (DC) fans and motors. The integrated full-
bridge driver output stage is designed to minimize audible switching
noise and electromagnetic interference (EMI) providing a low noise
solution
For system flexibility, the device has four modes of operation:
Forward, Reverse, Brake and Standby selected via FWD and REV
pins. The Forward and Reverse modes provide the motor rotation
direction control, the Brake mode allows quick stop and the Standby
mode helps system efficiency by powering down most of the internal
circuits to consume less than 32uA typical. The motor speed can be
adjusted by changing the duty ratio of the PWM signal on the FWD or
REV pins in the PWM mode or alternatively by adjusting DC voltage
input signal to the V
REF
pin in the VREF speed control mode.
To help protect the IC and the motor coil the ZXBM5210 includes
under voltage, over voltage, over current and over temperature
protections. Once the safe operating range has been exceeded the
device shuts down the output drive to help prevent over stress on the
IC or the coil. The device internal current protection threshold is 1.5A
typical.
The ZXBM5210 is available in the standard SO8 and thermally
enhanced SO8-EP packages.
Features
•
Supports single-coil reversible DC motor applications
•
Operating voltage: 3V to 18V
•
Four modes of operations: Forward, Reverse, Brake and
Standby
•
Low quiescent current of 0.85mA typical in normal operation
and 32µA in standby mode
•
Internal over current protection
•
Under voltage lockout and over voltage protection
•
Over temperature protection
• -40°
C to +85
°C /105°C
operating temperature
•
6kV ESD withstand capability
•
Standard SO-8 and thermally enhanced SO-8EP
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
SO-8
SO-8EP
Applications
• 5V / 9V/ 12V / 15V DC reversible motors and actuators
• Home appliances
• Handheld
power
tools
• Valve open and close
• Remote control motorized toys
• Medium Voltage/ Low Power DC Motors
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. S more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.