Xoro HSD 8410 - Manual (Page 66)

15
English
Connecting to a TV set with HDMI or VGA jack
A: Connecting the HDMI jack.
HDMI is a digital transmission technology for both audio and video.
Connect the DVD player and display with a HDMI-HDMI cable. Please note that some TV
set can not support RAW audio. In this case ,please set the DVD player audio digital out-
put to PCM.
If your TV set is not equipped with HDMI, but with DVI input, you can use a conversion
cable or an adapter to DVI. As DVI does not transmit sound, you also must add an audio
connection
Insert one end of an audio (cinch (RCA)) cable into the white/red cinch (RCA) socket L/R
AUDIO OUT at the back of the DVD player and the other end into the audio input socket
(usualy white/red) on the TV set (usually labelled "AUDIO IN" or "AV IN". Please also refer
to your TV set's user manual)
Switch on the TV set and select the HDMI or DVI input. For input selection please also
refer to your TV operating instructions.
B: Connecting the VGA jack
The VGA output can be used to connect the DVD-Player to the PC monitor.
As VGA does not transmit sound, you also must add an audio connection.
Insert one end of an audio ((Cinch(RCA)) cable into the white /red Cinch (RCA) socket L/R
AUDIO OUT at the back of the DVD player and the other end into the audio input socket
(usually white/red) on the PC monitor or sound system you plan to use.
HDMI OUT
VGA OUT
CONNECTIONS