Xoro HSD 8410 - Manual (Page 69)

18
English
CONNECTIONS
When DVD discs recorded in DOLBY digital, MPEG audio or other formats are played,
corresponding bit stream is output from the player OPTICAL and COAXIAL digital audio
output connector. When the player is connected to an external decoder or a power ampli-
fier, you can enjoy theater-quality at your home.
Notes when connecting the optical digital cable:
Remove the protective cap from the connector, insert the plug-ins of DVD and amplifier
optical slot so that the configurations of both the cable and the connector match. Keep the
protective cap and always reattach the cap when not using the connector to protect
against dust and laser beam.
Concerning the audio output setting for the unit
1
Sound having 96 KHZ sampling is converted to 48 KHZ sampling when it is output from
the coaxial digital audio output connector.
Notes:
Please set the digital output as RAW
Caution for the coaxial/optical digital audio output connector:
Do not connect an amplifier with a Coaxial or optical digital input connector) which does
not contain the Dolby digital or MPEG audio decoder otherwise it may be harmful to your
ears and damage your speakers.
HD resolutions:
This DVD Player reads information (EDID) from the TV to extract data such as type of TV
(HDMI) and resolution, and configures the DVD resolutions accordingly.
Connections to an external decoder or a power amplifier
Disc Sound recording format Digital output setting
DVD Dolby Digital
•
PCM (44.1 kHz sampling)
1
•
RAW
•
OFF
DVD DTS
•
RAW
•
OFF
DVD Linear PCM PCM (44.1 kHz sampling)
CD Linear PCM PCM (44.1 kHz sampling)
DVD Other PCM (44.1 kHz sampling)