Operation for card reader – Xoro HSD 8410 User Manual

Page 80

Advertising
background image

29

English

OPERATION FOR CARD READER

This player will enter DVD working status after power on. Pressing CARD/DVD button on
the remote control, the screen appears „Loading Card“ for a while then it will display
popup menu. You can select the relative cards or USB once they are plugged in.

This card reader supports four different cards CompactFlash, MultiMediaCard, Secure
Digital, SmartMedia and Memory Stick.

The CompactFlash slot is compatible with CF I/II of 8, 16, 32, 64, 128, 256 and 512 MB
size.
The Secure Digital slot is compatible with most brands of Secure Digital of 8, 16, 32, 64,
128, 256 and 512 MB.
The MultiMediaCard is compatible with most brands of MultiMediaCard/PRO of 8, 16, 32,
64 and 128 MB.
The Memory Stick slot is compatible with Memory Stick & Memory Stick Duo of 4, 8, 16,
32, 64 and 128 MB.

The SmartMedia slot is compatible with Smart media of 8, 16, 32, 64 and 128 MB.

Media supported for above cards: JPEG pictures, MP3, WMA and MPEG-4.

Inserting cards into the Card reader slot directly.

CAUTION:
To avoid complications while attempting to use this Card Reader, we recommend reading
this entire chapter and follow below instructions to insert different cards.

Warning:
DO NOT BEND THE CARDS OR INSERT THE CARDS IN THE WRONG DIRECTION. IF

THEYRE FORCED IN, THE READER OR THE CARDS OR USB MAY BE DAM-
AGED, OR DATA ON THE CARDS MAY BE LOST OR CORRUPTED. IF EX-
CESSIVE FORCE IS REQUIRED OR THE CARD JUST DOESNSEEM TO FIT,
DO NOT ATTEMPT TO FORCE THE CARD IN THE READER, INSTEAD, CON-

TACT TECHNICAL SUPPORT.


Inserting a SmartMedia Card
1.

Position of the SmartMedia Card so that it is on ist side with the gold contacts
located on the top side of the media. The media‘s notched corner
should be facing right when the gold contacts are on the top.
Please refer to below picture.

2.

Insert the SmartMedia Card into the slot gold contacs first and
recessed notch on the right. Gently push the card in all the way
until the card is fixedin place.

3.

The Card Reader can only accept 3.3V SmartMedia Cards. Other
SmartMedia Cards are not supported. Please refer the picture.

Digital Media Card Compatibility

Operation for Card Reader and USB

Advertising