Operation for card reader – Xoro HSD 8410 User Manual
Page 82
31
English
OPERATION FOR CARD READER
After switching to card reader working status, Card Reader will read cards as per foolow-
ing sequence: CF I/II —> SD —> SM —> MMC —> MS. If there is a CF cards in the slot,
it won‘t be read the other cards (SD, SM, MMC, MS). If there are no cards, it will show NO
CARD.
For playing control, please refer to JPEG Photo CD /Mp3/MPEG-4 playing.
The cards and thr USB device can only be removed when the card reader is at non-
working status and the cards indicator must be off, otherwise the reader or the cards may
be damaged, or data on the cards may be lost or corrupted.
To remove cards or USB devices, you should pull the card or USB device gently and hori-
zontally out of the slot by your hand directly.
Remark:
The supported range & capacity for the folders & files in the card
1.
This card reader can support 2 levels of folders in the card.
2.
The total folders number can be supported in the card is no more than 10. (Max 5
folders can be supported under directory)
3.
Only support 100 files for each folder or support 100 files for each card with not
any folder in it.
4.
A folder including different format files should not be supported.
5.
Large JPEG files larger than 1 MB may not be displayed normally.
6.
Do not insert different cards simultaneously.
Reading Card & Playing Control
Removing Cards and USB device