Xoro HSD 8410 - Manual (Page 76)

25
When setting a program or searching, you need to input a number. Press CLR button to
clear the number when the input number is incorrect. In case you set the Video output
which is not compatible to your TV set and picture distortion or black screen appears, you
could press OPEN/CLOSE button to open the disc tray, press CLEAR button to recover
the video output to the default one: RGB.
Press ANGLE continuously during playback of DVD disc to toggle the disc between avail-
able angles recorded on the disc if the disc has multi -angle function.
Press AUDIO button during playback to toggle between available audio languages re-
corded on the disc if the disc has this multi-language function.
Note:
Press AUDIO button could toggle available audio language soundtracks in Video-DVD,
MPEG-4, VCD and SVCD disc.
Press STOP button first then press PROG button, the program playback screen appears
on the TV set. tracks or chapters can be programmed. Use NUMBER button to input your
preferred track (CD) or chapter (DVD) when the blue cursor flashes on the position 1.
Note: When programming a DVD disc, you must input title number ahead of and chapter
number after it. It is invalid to input the number larger than available. Then press direction
button (UP, DOWN, LEFT, RIGHT) down to remove blue cursor to position 2 and the
same procedure to program your preferred track or chapter.
Use CLR button and enter a new number to amend false or unsatisfied program through
direction button. After you have selected all your preferred title/chapter(s) or track(s), Re-
move the cursor to Play Program and press enter to start the program playback.
You can quit program setting by pressing PROGRAM button again and PLAY again to
start normal playback.
Notes:
•
Some discs do not have program function.
•
The search function is not available during PROGRAM playback.
English
OPERATION
Changing the Camera Angle
Using the Programm Feature
Using the CLR button
Audio function