Xylem 19 001 351R2 PACE Integrated Pump Controller Human Machine Interface (HMI) for the Silent Storm VFD Pumping System – User Guide - Manual (Page 12)

12
Lake Level/Transfer/Timed Pump Monitoring
Screen:
Figure 17: Lake Level Controls Monitoring
Screen
This screen allows you to see the status of the Lake
Level/Timed pump control system at a glance.
Pump status (Off, Run, Fault), switch status
(On/Off), Level settings can be viewed/adjusted
(When logged in as Admin, Technician, or
Supervisor only), pump hours can be monitored,
Start/Duration times for timed pumps can be
monitored, lake levels and/or probe status (as
equipped).
Simple Filters Monitoring Screen
Simple filters include Wye strainers and other filters
controlled by a simple on-off flush signal. This
screen will monitor all installed filters. ∆P denotes
differential pressure.
Red, no animation: Stopped
Green, rotating center: Running
Yellow, flashing center: Fault condition
A green colored graphic denotes that the filter is
flushing.
Other information displayed includes filter number,
run time (in hours), and whether the enclosure
switch is set to on or off.
Tap [Next] to move to the next status screen.
Figure 18: Simple Filters Monitoring Screen
Scanner Filters Monitoring Screen
The scanner filter monitoring screen shows the
status of a single filter with up to eight chambers.
The inset box shows if the flush cycle is on or off, if
the enclosure filter switch is set to on or off, if ΔP is
bypassed, and if a filter faults, ‘Fault’ blinks as a
notification. Text showing that ΔP is present or
absent is displayed below the box.
Red, no animation: Stopped
Green, rotating center: Running
Yellow, flashing center: Fault condition
Tap [Next] to move to the next status screen.
Figure 19: Scanner Filter Monitoring Screen
ALARMS
Tap [Alarms] from the Operations menu.
The alarms screen shows all current and
unacknowledged alarm events. Use the vertical
scroll bar to view all alarm events if necessary.
The latest alarm flashes in the banner at the top of
the screen till it is acknowledged using [Ack All].