Xylem 19 001 351R2 PACE Integrated Pump Controller Human Machine Interface (HMI) for the Silent Storm VFD Pumping System – User Guide - Manual (Page 13)

13
NOTE: Be sure to scroll to the bottom of the alarm
events list before using [Ack All] to ensure that all
alarms have been viewed.
Alarm notifications are color coded.
Red: Active, Unacknowledged Alarm
Green: Active, Acknowledged Alarm
Blue: Inactive, Unacknowledged Alarm
To view alarm events from the past, from the drop
down menu at bottom left, select ‘History’. Tap
[Period], and enter the start and end dates in a pop
up screen. Tap [Apply] to save changes or [Close]
to cancel.
Figure 20: Alarms Screen
EVENTS
Tap [Events] from the Operation menu.
This screen shows system events for current day,
date & time, and a short message about the event.
To view past events, tap [Period] and specify the
start and end date to view the events.
More events may be viewed using the vertical scroll
bar.
Figure 21: Events Screen
LOCKOUT VIEW
Tap [Lockout View] from the Operations menu.
Lockouts are common when water usage and
power restrictions limit pump usage to a certain
time.
Different lockouts may be viewed using the
numbered tabs at top. The Day selected, the Start
Time, the Duration, the Combo number selected,
the Combo SP (combo setpoint), and the pump
Speed are shown.
Figure 22: Lockout View Screen
KWH RECORDS
Tap [KWH Records] from Operations menu.
The KWH Records are similar to the Totalizers and
record power usage.
NOTE: The data on this screen is available only
when used with Toro™ or Lynx™ irrigation control
systems and/or KW Measurement hardware is
installed.
Figure 23: KWH Records, Overview