Xylem 19 001 351R2 PACE Integrated Pump Controller Human Machine Interface (HMI) for the Silent Storm VFD Pumping System – User Guide - Manual (Page 8)

8
navigate to other key areas of the application. The
content of the navigation bar changes depending on
what type of user is logged in.
2. The Header, located at the top center of the
screen, displays the screen name in the banner,
and (depending on the buttons selected on the
right) the date and time, or the pumping station’s
current flow and pressure readings.
NOTE: A flashing header is indicative of a system
fault.
3. The Main Window, located in the center of the
screen, displays one or more panes of information
about the pumping station. A grayed-out field in this
window is read-only. Other fields (with a few
exceptions) may be edited.
Figure 3: Basic Screen Layout
User Types
There are different types of users recognized by the
system:
Guest: Only operation screens are accessible in
view-only mode. Users are logged in as a Guest by
default.
Supervisor: End-User configurable setup and
operation screens are accessible. Supervisors must
log-in using a password.
Technician: All setup and operation screens are
accessible. Technicians must log-in using a
password. See the Technician Guide for additional
functions.
Note: Some values require you to set the “Enable
Edit” checkbox before you can change the values.
This is a precautionary measure intended to
prevent unwanted and accidental register value
writes. These values are available to technicians
only. Values normally accessed at the Supervisor
level or lower are not affected.
Touch Panel Log In
Tap [Log In] from the Home Screen.
The screen displays the current user type at the top
of the screen.
Figure 4: Log in Screen
Default user is a Guest user. No log in is required.
To log in as a Technician, tap [Technician], and
then tap on the empty Password field to enter the
Technician password. Tap [OK] to log in or [Cancel]
to exit without logging in.
To obtain a Technician password, call Flowtronex
customer service and give them the APP code
displayed on the screen. Customer Service will then
give you a password corresponding to that APP
code which will remain active until the last day of
the current month.
After a password has expired, a new APP code
must be generated allowing you to get a new
password. See Security Setup for information on
how to generate an APP code.
NOTE: The web-based screens require an
immediate log-in as either a guest (no username or
password required), a Supervisor (username and
password are required) or a Technician (username
and password are required). The log-in screen will
be displayed first on the web-based application
only.
Operation Menu
Tap [Operation] from the Home screen.
The Operation Menu allows you to view the
pumping station’s operational trends (System
View), flow totals, pump and auxiliary equipment
status, alarms, events, lockouts, and power
consumption (KW Data).