Monitoring equipment, Parts monitoring equipment – Xylem GK GV (8201, 8201X) User Manual
Page 14
Parts
WS0001
11A
1
4
2
3
7
8
9
6
5
Positio
n
Part
Description
1
Shaft
Stainless steel with an integrated rotor
2
Stator housing
Cooled by ambient liquid
3
Motor
For information about the motor, see
4
Mechanical seal Type: Mechanical face seal
5
Oil housing
Includes coolant that lubricates and cools the seals; acts as a buffer between the
pumped fluid and the electric motor
6
Impeller
C-impeller
D-impeller
7
Main bearing
Single-row ball bearing
8
Thermal contact
If the pump is equipped with a thermal contact, see
(page 12) .
9
Support bearing Single-row ball bearing
Monitoring Equipment
The following applies to the monitoring equipment of the pump:
• The stator incorporates thermal contacts connected in series that activates the alarm at
overtemperature.
• The thermal contact open at 125°C (257°F).
• Ex-approved pumps must have thermal contacts connected to the control panel.
Product Description
12
GK, GV (8201, 8201X) Installation, Operation, and Maintenance Manual