Xylem GK GV (8201, 8201X) - Manual (Page 15)

• The sensors must be connected to either the SMR 311 monitoring equipment or an
equivalent equipment.
• The monitoring equipment must be of a design that makes automatic restart
impossible.
• Information in the junction box shows if the pump is equipped with optional sensors
Optional sensors
LD LD is a miniature float switch for detection of liquid in the stator housing. Due to its
design it is best suited for pumps in a vertical position. The LD sensor is installed in the
bottom of the stator housing.
The data plate
The data plate
The data plate is a metal label located on the main body of the pump. The data plate lists
key product specifications.
Ex- and MSHA-approved products also have approval plates. They are described below, if
applicable.
2
13 12 14
22
21
20
17 18 19 16 15 9 10 11
8
7
6
5
4
3 1
WS000351A
1. Curve code/Propeller code
2. Serial number
3. Product number
4. Country of origin
5. Additional information
6. Phase; type of current; frequency
7. Rated voltage
8. Thermal protection
9. Thermal class
10. Rated shaft power
11. International standard
12. Degree of protection
13. Rated current
14. Rated speed
15. Maximum submergence
16. Direction of rotation: L=left, R=right
17. Duty class
18. Duty factor
19. Product weight
20. Locked rotor code letter
21. Power factor
22. Maximum ambient temperature
The name plate
The name plate is a metal label located on the main body of the pump. This plate lists key
product specifications for the branded pump.
Product Description
GK, GV (8201, 8201X) Installation, Operation, and Maintenance Manual 13