Fill with coolant – Xylem GK GV (8204, 8204X) User Manual
Page 39
Advertising
![background image](/manuals/310389/39/background.png)
WS001426A
Fill with coolant
Use a coolant that is a mixture of 70% water and 30% monopropylene glycol. The coolant
should prevent corrosion and be nonpoisonous (generally recognized as safe by the FDA
as food additives under part 184 and 182).
NOTICE:
Clean water with an anti-corrosive is an acceptable coolant when there is no risk of
freezing.
1. Fill with coolant until it overflows through the opposite hole, as shown here.
Quantity: approximately 2.2 L (2.3 qt.)
W001290A
2. Replace the O-rings.
3. Tighten the coolant plugs.
Tightening torque: 44 Nm (33 ft-lbs)
Maintenance
GK, GV (8204, 8204X) Installation, Operation, and Maintenance Manual
37
Advertising