Install the impeller – Xylem GK GV (8204, 8204X) User Manual
Page 43
Advertising
![background image](/manuals/310389/43/background.png)
e) Remove the rod.
3. Raise the pump.
4. Remove the drive unit from the pump housing:
a) Remove the pump housing screws.
WS006264A
b) Remove the drive unit from the pump housing.
WS001477A
5. Remove the impeller:
a) Place the drive unit horizontally.
b) Remove the impeller screw.
c) Remove the impeller and the conical sleeve.
Install the impeller
1. Mount the impeller:
a) Make sure that the end of the shaft is free from burrs.
Polish off any flaws with a fine emery cloth.
b) Grease the shaft end.
Maintenance
GK, GV (8204, 8204X) Installation, Operation, and Maintenance Manual
41
Advertising