YSI DIQ/S 182 XT-4-PR - Manual (Page 44)

Installation System 182 XT-4
3 - 30 ba76027e01 02/2012
3.7.4 Top hat rail mounting
Materials required  THS/IQ kit for top hat rail mounting (see chapter 12 A
CCESSORIES
AND OPTIONS ).
Tools  Phillips screwdriver.
Mounting the
DIQ/S 182 XT-4-PR on a
top hat rail
Fig. 3-21 Mounting the DIQ/S 182 XT-4-PR on a top hat rail
1 Screw the clamping assembly (item 1 in Fig. 3-21) with the two
plastic self-tapping screws (item 2) onto the back of the DIQ/
S 182 XT-4-PR.
2 Attach the DIQ/S 182 XT-4-PR onto the top hat rail from above
using the clamping assembly and press against the rail until
the clamping assembly clicks into place. The DIQ/S 182 XT-4-
PR can subsequently be pushed sideways.
3 To unhook the DIQ/S 182 XT-4-PR, press it downwards and
pull it forwards at the bottom.
For sta
ck m
ounting
re move
label
an d insta
ll contact carrier
1
2