YSI DIQ/S 182 XT-4-PR User Manual
Page 78
Operation
System 182 XT-4
4 - 12
ba76027e01
02/2012
Calibration data
You can view the data of the last calibration under the Cal menu item.
Sensors that have not yet been calibrated do not have this menu item.
The symbol in the Cal line quotes the validity state:
= valid
= invalid
The content and form of the calibration data depend on the sensor type.
Log book messages
Each log book message in the log book consists of one line. The latest
message is on the first position. They are not yet marked with a tick, i.e.
acknowledged.
Fig. 4-9
Log book
Note
The log book shows the current status at the point of time it was
opened. If new messages arrive while the log book is open, these do
not appear in the log book. The new messages are only included when
you switch to the measured value and status display.
1
Message type (error or info symbol) of an unacknowledged
message,
or tick () with an acknowledged message
2
Message code
3
Date and time of the message
1 2
3