Xylem IQ SensorNet FDO 70x IQ (SW) User Manual
Page 14
Advertising
Commissioning
FDO
®
70x IQ (SW)
3 - 2
ba76014e01
02/2012
Connecting the sensor
to the sensor
connection cable
Fig. 3-1
Connecting the sensor
1
Take the protective caps off the plug connections of the sensor
and the SACIQ (SW) sensor connection cable and keep them
safe.
2
Plug the jack of the SACIQ (SW) sensor connection cable onto
the plug head connector of the sensor. At the same time, rotate
the socket so that the pin in the plug head connector (1) clicks
into one of the two holes in the socket.
3
Then screw the coupling ring (2) of the sensor connection
cable onto the sensor up to the stop.
SACIQ
1
2
Advertising