YSI IQ SensorNet MIQ/IC2 Module User Manual
Page 10

Installation
MIQ/IC2
3 - 2
ba76034e01
01/2012
Any wires that are not used and project into the housing must be cut
off as closely as possible to the cable gland.
Materials required
Wire end sleeves, suitable for the connecting wires, with suitable
crimping tool
Cable gland with sealing ring (scope of delivery of the MIQ/IC2)
Tools
Cable stripping knife
Wire stripper
Phillips screw driver
Small screw driver
Connecting lines to the
terminal strip
Fig. 3-1
Terminal strip MIQ/IC2
1
Open the module.
2
Open the dummy screw fitting under the required input. Keep
the dummy screw fitting for possible later modifications.
3
Screw the cable gland (pos. 1 in Fig. 3-1) with the sealing ring
(pos. 2) into the module housing.
1
3
2
SENSORNET 2
SENSORNET 1
ON
OFF
X6
RED
RED
SN
TERMINA
TO
R
SHIELD
GREEN
SHIELD
GREEN
X5
X4
X3
X2
X1
X8
X9
X7
X11
X12
X10
24V
0/4...20mA
0/4...20mA
Current
Input 1
Supply
max
240 mA
Current
Input 2
+ REC 1-
+ REC 2 -
+ Power -