YSI IQ SensorNet MIQ/A-PR Module - Manual (Page 15)

MIQ/(A-)PR Interface for the PROFIBUS
15 ba76020e01 01/2012
Fig. 3-8 Shielding terminal with PROFIBUS cable (view from above)
Fig. 3-9 Looping the PROFIBUS cable through an MIQ/(A-)PR
9 Position the second washer and screw it tight.
10 Shorten the wires of the shielding braid if they protrude over
the shielding terminal.
11 Put the PROFIBUS wires together in pairs.
12 Connect the PROFIBUS wires and shield to the terminal
connections of the PROFIBUS module (connections ALine,
BLine and Shield, see section 3.2.1).
13 Fasten the cap nut of the screwed cable gland.
approx.
15 mm
approx.
15 mm
approx.
5 mm
4 2
6
7 1 3
AnyBus-S module
for Profibus-DP