YSI pHotoFlex STD Colorimeter - Manual (Page 18)

Operation pHotoFlex
®
STD
18 ba76122e01 02/2013
4.2 Inserting a cell
To be able to insert cells in the pHotoFlex
®
STD, the cell shaft has to
be prepared to take in a cell.
Inserting a 28 mm cell
1 Push the dust cover (1) upward.
The cell shaft for 28 mm cells is open.
 Insert a 28 mm cell (see below)
 Insert a 16 mm cell (see page 19)
1
2 Insert the cell so that it is positioned on the bottom of the cell
shaft.
The cell is ready to be measured.