YSI pHotoFlex STD Colorimeter - Manual (Page 54)

Operation pHotoFlex
®
STD
54 ba76122e01 02/2013
4.7.4 Transmitting data
The following table shows which data are transmitted to the interface in
which way:
With the <PRT> key you output data that is being shown on the display
to the interface (displayed measured values, stored measurement da-
tasets, calibration record).
Data Operation / description
Current
measured value  Press <PRT>.
 Simultaneously with every manual storage
process.
Stored measured
values  Display stored dataset and press <PRT>.
 All datasets according to the filter criteria via
the RS232 download function
(see section 4.6.2).