YSI pHotoFlex STD Colorimeter - Manual (Page 22)

Operation pHotoFlex
®
STD
22 ba76122e01 02/2013
 Messages
Information or operating instructions are designated by the
i sym-
bol. They cannot be selected.
The principles of navigation are explained in the two following sections
by reference of examples:
 Setting the language (section 4.3.3)
 Setting the date and time (see section 4.3.4).
4.3.3 Example 1 on navigation: setting the language
The following example describes in the language of the country how to
set the language. On delivery, English is set as the language in the
pHotoFlex
®
STD. During initial commissioning, the language setting is
done in the menu, Configuration / System / Language.
1 In the measured value display:
Using <MENU>, open the Configuration menu.
The instrument is in the configuration mode.
2 Select the System menu with <> <>.
The current selection is highlighted as white text on a black
background.
3 Open the System menu with <START/ENTER>.
i83: A6/25 MC
Cell
i = 16 mm
iInsert blank sample
Start measurement
Measure blank value
i83: A6/25 MC
Cell
i = 16 mm
iInsert blank sample
Start measurement
Measure blank value