Example 2 on navigation: setting the date and time, Nd time (see section 4.4.6 e, Xample – YSI TruLab 1310P User Manual
Page 20: Navigation, Etting, Date, Time, Section 4.4.6 e
Operation
TruLab pH 1310
20
ba76156e01
03/2014
4.4.6 Example 2 on navigation: Setting the date and time
The measuring instrument has a clock with a date function. The date and time
are shown in the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
7.
Open the setting mode for the Language with <MENU/
ENTER>.
8.
Select the required language with <><>.
9.
Confirm the setting with <MENU/ENTER>.
The meter switches to the measuring mode.
The selected language is active.
Language:
English
Beep
:
Off
Illumination
:
On
Contrast
:
50 %
Switchoff time
:
1 h
General
01.02.2014
08:00
Back
Language:
English
Beep
:
Off
Illumination
:
On
Contrast
:
50 %
Switchoff time
:
1 h
General
01.02.2014
08:00
Back