8 data storage, 1 manual storage, Data storage – YSI TruLab 1310P User Manual
Page 47: Manual storage, Section 8 d, Storage, 8data storage
TruLab pH 1310
Data storage
ba76156e01
03/2014
47
8
Data storage
You can transmit measured values (datasets) to the data storage:
Manual storage (see section 8.1 M
Automatic storage at intervals (see section 8.2 A
Each storage process transmits the current dataset to the interface at the same
time.
8.1
Manual storage
You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
If the storage is full
The following window appears if all 500 storage locations are occupied:
You have the following options:
1.
Press the <STO> key shortly.
The menu for manual storage appears.
2.
If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <MENU/ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
01.02.2014 11:24:16
pH 7.000 24.8 °C AR +++
ID number:
1
Continue
Manual data storage
4 From 500
01.02.2014
08:00
Back
Data storage full. Erase?
Yes
No
Warning
01.02.2014
08:00
Back