YSI TruLab 1310P - Manual (Page 52)

Data storage TruLab pH 1310
52
ba76156e01 03/2014
Quitting the display To quit the display of stored measurement datasets, you have the following
options:

Switch directly to the measured value display with <M>.
 Quit the display and move to the next higher menu level with <F1>/[Back].
8.3.2 Erasing the measurement data storage
Erasing the measurement data storage (see section 8.3.1 E DITING THE
MEASURED VALUE STORAGE , page 50).
8.3.3 Measurement dataset
A complete dataset consists of:

ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor or manually set tem-
perature
 AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no AR indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation
8.3.4 Storage locations
The TruLab pH 1310 meter has two measurement data storages. The
measured values recorded either manually or automatic are stored separately
in individual measurement data storages.
Storage Maximum number of datasets
Manual data storage 500
Automatic data storage 5000