Xylem ProLab 3000 - Manual (Page 26)

Commissioning ProLab 3000
26 ba75645e03 12/2012
3.5 Connecting the USB mouse
You can connect the USB mouse included in the scope of delivery to
the USB-A USB Host interface of the ProLab 3000. Thus the
ProLab 3000 can be operated like a PC.
3.6 Connecting sensors
If an ID sensor is connected, the ProLab 3000 recognizes the sensor
type, sensor name and series number of the sensor.
If the ID sensor cannot be automatically assigned to a channel, the
Automatic sensor recognition window prompts the manual assignment.
Note
 wrong assignment of ID sensors to channels can be corrected by
reassigning the sensors, e.g. after
 Switching off, then on the meter
 Disconnecting, then reconnecting all ID sensors.