Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 13)

Installation
This section details the installation and configuration of the FOX Matrix Switchers, including:
• Setup and Installation Checklist
• Rear Panel Boards, Cabling, and Features
• Front Panel Features
• Reset Operations
Setup and Installation Checklist
Get Ready
c Familiarize yourself with the matrix switcher.
c Obtain IP setting information for the matrix switcher from the local network
administrator. Read Ethernet Connection , beginning on page 82.
Configure the Matrix Switcher
c Install the desired I/O boards ( page 75 ).
Perform Physical Installation
c If desired, install the switcher in a rack ( page 74 ).
c
Cable input and output devices to the I/O ports ( page 11 ).
c As desired, connect computers, control systems, or both to the rear panel Remote port
( page 13 ), LAN port ( page 14 ), and front panel Configuration port ( page 16 ).
c Connect power ( page 15 ).
c Test the switcher by creating a tie ( page 25 ).
Install Software
c
Install the Matrix Switchers Control Program ( page 38 ).
FOX Matrix 320x and FOX Matrix 14400 • Installation 7