Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 68)

Configuration Tab
System Settings Page
The FOX Matrix switcher downloads the System Settings page (see figure 38) when you
click the
Configuration tab. The screen consists of fields in which you can view and edit
IP administration and system settings. You can access the Email Settings and Passwords
pages by clicking the appropriate link. See
Ethernet Connection on page 82 for basic
information about IP addresses and subnetting.
Figure 38. System Settings Page
On password-protected connections, there are two levels of protection: administrator and
user. Administrators have full access to all switching capabilities and editing functions. Users
can create ties, create and recall presets, set output mutes, and view all settings with the
exception of passwords.
IP Settings fields
The IP Settings fields provide a location for viewing and editing settings unique to the
Ethernet interface. After editing any of the settings in this field, click the
Submit button at
the bottom of the field.
Unit Name field
The Unit Name field contains the name used as the “from” information when the switcher
e-mails notification of its failed or repaired status. This name field can be changed to any
valid name, up to 24 alphanumeric characters.
NOTE: The HTML language reserves certain characters for specific functions (see
Special Characters on page 35).
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation 62