Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 87)

Installing a Fan Module
1. Orient the fan to be installed so that the printing on the back of the panel is rightside up.
2. Align the flanges on the fan with the top and bottom fan guides (see figure 50 , on the
previous page).
3. Gently slide the fan into the enclosure until the fan meets resistance.
4. Gently seat the fan in the backplane.
5. Use a screwdriver to tighten the top and bottom screws to secure the fan in place.
6. Secure the row identification plate to the fan.
FOX Matrix 320x and FOX Matrix 14400 • Maintenance and Modifications 81