Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 57)

Uploading HTML Files
You can create customized HTML pages for the switcher to display. The HTML Files List
window (see figure 27), accessible via the Tools menu, provides a way to view the contents
of the file system of the switcher and upload custom HTML pages to the switcher.
7 8 4
Figure 27. HTML Files List Window
Upload HTML pages as follows:
NOTES:
• The files listed in figure 27 are shown for example only and may not be present on
your switcher.
• The HTML Files List window is for inserting your own HTML pages. This is not the
window to replace the firmware that controls all switcher operation. See
Updating
Firmware , on page 47, to replace the firmware.
• The HTML language reserves certain characters for specific functions (see Special
Characters on page 35).
1. Connect the PC to the matrix switcher via any of the serial ports or the Ethernet port of
the switcher.
2. Start the Matrix Switchers Control Program and connect to the FOX matrix switcher
(see
Using the Matrix Switcher Control Software , steps 1 through 4, starting on
page 40).
3. Click Tools > HTML File Manager .
4. Click the Pick File(s) to Load to Server button. An Open File dialog box opens.
5. Navigate to the folder where you saved the HTML files. Select the files.
NOTES:
• To select multiple files, hold the <Ctrl> key while you select the desired files.
• If you want one of the HTML files that you created to be the default start-up
page, name the file “index.html.” The FOX matrix switcher automatically looks
for that file name when you first connect to it using an Internet browser.
6. Click the Open button. Uploading the files to the FOX matrix switcher may take a few
minutes.
7. Click the Update button to confirm the upload.
8. Click the Close button to exit the HTML Files List window.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software 51