Rack mounting the fpc assembly, Unpacking and assembling the front panel, Controller – Extron Electronics FPC 5500 User Manual
Page 13: E the fpc computer to the fpc mounting panel (see, Unpacking and, Assembling the front panel controller
Advertising
Extron FPC 5500 • FPC Installation and Operation
7
Unpacking and Assembling the Front Panel Controller
The FPC 5500 is shipped fully assembled and ready to be rack mounted. Six mounting blocks
and screws secure the FPC computer to its rack-mountable metal frame (see figure 5).
Mounting Blocks (6)
Figure 5.
FPC 5500 Rear View with Pre-installed Mounting Blocks
Rack Mounting the FPC Assembly
The appropriate rack mounting hardware is included with the controller. Rack mount the
controller as follows:
1.
Insert the controller assembly into the rack, align the holes in the mounting panel with
those of the rack.
2.
Secure the controller assembly to the rack using the supplied machine screws.
Advertising